The ACN52832 is a fully integrated, ultra-low power, Bluetooth Smart (former BLE) module in a small form factor which features the advanced Nordic Semiconductor nRF52832 SoC – combining the latest Bluetooth connectivity with a class leading performance.
Its capabilities are tailored for the upcoming demands of sophisticated IoT devices where small size, low power, application performance and radio-range are essential.
The ACN52832 module features a Bluetooth 4.2 compliant 2.4GHz transceiver, an ARM® Cortex™ M4F CPU @64MHz, 512kB of flash memory, 64kB RAM options, a suite of analog and digital peripherals, a DC-DC converter with advanced power management, combined with an on-board antenna for excellent RF performance.
Unlike many competitors it features a maker-friendly PCB scale package which allows a fast and easy integration without sacrificing access to its advanced peripherals and capabilities.
KEY PRODUCT BENEFITS
To view datasheets, inventory availability changes, pricing and delivery, please click on desired part number below or contact customerservice@dcomponents.com:
|
Bluetooth Modules - 802.15.1 nRF52832 Bluetooth Low Energy IoT Smart Module, maker friendly |
|
| Manufacturer: | aconno |
| Product Category: | Bluetooth Modules - 802.15.1 |
| RoHS: | Compliant |
| Protocol: | Bluetooth 5.0 |
| Class: | Bluetooth Low Energy (BLE) |
| Interface Type: | I2C, I2S, PDM, SPI, UART |
| Programming Interface | Tag-Connect SWD |
| GPIOS | 28 GPIOS, flexible pin mapping |
| Output Power: | 4 dBm |
| Data Rate: | 1 Mb/s |
| Receiver Sensitivity: | - 96 dBm |
| Frequency: | 2.4 GHz |
| Operating Supply Voltage: | 1.7 V to 3.6 V |
| Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Antenna: | PCB antenna |
| Antenna Connector Type: | PCB antenna |
| Core: | 32-bit ARM Cortex M4F |
| Memory | 512 kB flash memory, 64 kB RAM |
| Height: | 3 mm |
| Length: | 25 mm |
| Moisture Sensitive: | Yes |
| Mounting Style: | SMD/SMT |
| Product: | Bluetooth IoT Modules |
| Product Type: | Bluetooth Modules |
| Sensitivity: | - 96 dBm |
| Shielding: | Shielded |
| Factory Pack Quantity: | 1000 |
| Subcategory: | Wireless & RF Modules |
| Supply Current Receiving: | 6.5 mA |
| Supply Current Transmitting: | 7.1 mA @ 0DBM, 4.1 @-40DBM |
| Width: | 20.2 mm |
| Unit Weight: | 5,489 g |
| Certification | CE/RED/FCC/ICC Certified |
All modules can be used for smaller ranges, for example, to determine if somebody is 5 or 15 centimeters away, but also for much greater distances. The ACN52832, as well as the miniature ACN52832 XS, have a range of 130 meters, more than enough for smart home and most industrial use cases. Still not far enough? The ACN52840 goes up to 1,5 kilometers.
|
Bluetooth Development Tools - 802.15.1 Bluetooth Breakout Board for Smart Module ACN52832 (Sold Separately), Rapid Prototyping, Maker Friendly, FCC/ICC Certified |
|
| Manufacturer: | aconno |
| Product Category: | Bluetooth Development Tools - 802.15.1 |
| RoHS: | Details |
| Product: | Breakout Boards |
| Tool Is For Evaluation Of: | ACN52832 |
| Frequency: | 2.4 GHz |
| Product Type: | Bluetooth Development Tools |
| Factory Pack Quantity: | 1 |
| Subcategory: | Development Tools |
| Version: | Version 4.2 |
The aconno ACD52832 development board is a comprehensive development kit designed to create low power solutions based on Bluetooth Smart. It comes with a range of micro-electromechnical-systems (MEMS) sensors, an electronic paper display, NFC and all sorts of other features that empower you to create your IoT applications.
It provides a complete set of tools for rapid development of prototypes and products and is made for product designers, makers and creators developing tomorrows connected objects and devices.
|
Feature and Sensor rich IOT Development board, based on aconno ACN52832 Bluetooth module. Featuring ePaper, various sensors, buttons, relais, switches, - ideal foir rapid prototyping. |
|
| Manufacturer: | aconno |
| Product Category: | Bluetooth Development Tools - 802.15.1 |
| RoHS: | compliant |
| Product: | Development Kits |
| Tool Is For Evaluation Of: | ACN52832 |
| Frequency: | 2.4 GHz |
| Operating Supply Voltage: | 1.7 V to 3.6 V |
| Antenna: | PCB antenna |
| Interface Type: | I2C, I2S, PDM, SPI, UART |
| Core: | 32-bit ARM Cortex M4F |
| Memory | 512 kB flash memory, 64 kB RAM |
| Maximum Operating Temperature: | + 85 C |
| Minimum Operating Temperature: | - 40 C |
| Moisture Sensitive: | Yes |
| Product Type: | Bluetooth Development Tools |
| Factory Pack Quantity: | 1 |
| Subcategory: | Development Tools |
| Unit Weight: | 118,610 g |
| DISPLAY | ePaper 128 x 128 |
| Features: | Temperature Sensor, Light Sensors, 9-DOF with 3D accelerometer, 3D magnetometer, 3D gyroscope, Graphical high resolution e-paper display with 200x200 pixels resolution & 184 dpi pixel density, Integrated Texas Instruments USB Li-Ion battery charger with up to 1.5A charging current & automatic battery - USB power supply changeover, Connector for optional Li-Po / Li-Ion battery, Temperature sensor with temperature range between -40°C ~ 125°C with ± 4°C accuracy, Light sensitive sensor, IR-emitter, Piezo buzzer, Digital joystick, Two LEDs, Two push buttons, Potentiometer for ADC values, Pin-header with seven I/O –ports, Two potential free relay outputs, Two PWM controlled servo outputs |
| Programming Interface | Segger on Board; Tag connect interface |
Programming done easy … our USB programmer is ideally suited for Engineers, Developers, Makers or Tinker who wants to download their code to an ARM based device.
|
Programmers - Processor Based Programmer/ Flasher ARM - vendor independent CoreSight debug interface |
|
| Manufacturer: | aconno |
| Product Category: | Programmers - Processor Based |
| RoHS: | Details |
| Product: | TAG-Connect Programmer, Flasher |
| Tool is for programming of: | any ARM Cortex based microcontroller featuring Tag Connect M4F, ARM7, ARM9 |
| For Use With: | aconno FlashMeBabyOMT, KEIL uVision/ OpenOCD/ GNU GDB/ iAR/ mbed.org online compiler |
| Programming Interface: |
USB interface to standard ARM  CoreSight™ Serial Wire Debug Port (SW-DP) |
| Core: | NXP with 48 MHz, low power |
| Operating Supply Voltage: |
No external power supply needed on top of USB connection; programmer offers 3.3V / 50mA power source |
| Brand: | aconno |
| Description/Function: | Tag-Connect based Flash Programmer for ARM MCUs and ARM Cortex with legs |
| Ease of use: | Flash using "Drag N Drop": ACNPROG will be recognized as an USB-storage device - no annoying driver issues. |
| Based on: |
open source & open hardware project CMSIS-DAP |
| Interface Type: | JTAG/SWD, USB |
| Packaging: | Bulk |
| Product Type: | Programmers - Processor Based |
| Factory Pack Quantity: | 1 |
| Subcategory: | Embedded Solutions |
| Tradename: | acnPROG |
About Aconno
Video: Introducing aconno
https://www.youtube.com/watch?v=YZiogfZWapM&list=UUT0Nwe92lhlVmQdOyFk2SeA&index=29
Video: Production - Made in Germany
https://www.youtube.com/watch?v=irlwQQZVRt8&list=UUT0Nwe92lhlVmQdOyFk2SeA&index=6
Video: Custom Solutions - developing with aconno
https://www.youtube.com/watch?v=AK4MDvmSUzg&list=UUT0Nwe92lhlVmQdOyFk2SeA&index=7